Fully working Professional Engineering Software at very CHEAP PRICES
=====================================================================================
Home Screen Shots Codes & Standards Prices
=====================================================================================
AGA XQ0005 ===> Odorization Manual
AGA Z223.1 ===> 07/19/2002 National Fuel Gas Code-NFPA 54:2002; Addenda A: 2003
Z223.1 HANDBOOK 01 ===> 01/01/2002 National Fuel Gas Code Handbook-Fifth Edition
ANSI:
=====
ANSI B16.1 ===> 01/01/1998 Cast Iron Pipe Flanges and Flanged Fittings Classes 25, 125, and 250
API 526 ===> 06/01/2002 Flanged Steel Pressure Relief Valves-Fifth Edition
API 570 ===> 10/01/1998 Piping Inspection Code Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems-Second Edition; Addendum 1 - February 2000; Addendum 2 - December 2001; Addendum 3 - August 2003
API 594 ===> 09/01/2004 Check Valves: Flanged, Lug, Wafer and Butt-welding-Sixth Edition
API 599 ===> 08/01/2002 Metal Plug Valves - Flanged, Threaded and Welding Ends-Fifth Edition
API 600 ===> 10/01/2001 Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries-Eleventh Edition; ISO 10434:1998/ ISO 10434 Adoption
API 602 ===> 02/01/2005 Steel Gate, Globe and Check Valves for Sizes DN 100 and Smaller for the Petroleum and Natural Gas Industries-Eighth Edition; ISO 15761 Adoption
API 603 ===> 05/01/2001 Corrosion-Resistant, Bolted Bonnet Gate Valves - Flanged and Butt-Welding Ends-Sixth Edition
API 608 ===> 08/01/2002 Metal Ball Valves - Flanged, Threaded, and Welding End-Third Edition
API 609 ===> 05/01/2004 Butterfly Valves: Double Flanged, Lug- and Wafer-Type-Sixth Edition
API 610 ===> 10/01/2004 Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries-Tenth Edition; ISO 13709 Adoption
API 611 ===> 06/01/1997 General-Purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services-Fourth Edition
API 612 ===> 04/01/2003 Petroleum, Petrochemical and Natural Gas Industries - Steam Turbines - Special-Purpose Applications-Fifth Edition; Errata July 2003
API 619 ===> 12/01/2004 Rotary-Type Positive-Displacement Compressors for Petroleum, Petrochemical, and Natural Gas Industries-Fourth Edition
API 661 ===> 03/01/2002 Air-Cooled Heat Exchangers for General Refinery Service-Fifth Edition; ISO 13706: 2000/ISO 13706 Adoption
ASME B1.20.1 ===> 08/31/1983 (R 2001) Pipe Threads, General Purpose (Inch)-Revision and Redesignation of ASME/ANSI B2.1-1968
ASME B16.3 ===> 01/01/1998 Malleable Iron Threaded Fittings Classes 150 and 300
ASME B16.4 ===> 01/01/1998 Gray Iron Threaded Fittings - Classes 125 and 250
01/01/1998 Interpretations to B16.4-1998 - Gray Iron Threaded Fittings - Classes 125 and 250
ASME B16.5 ===> 11/28/2003 Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24 Metric/Inch Standard-Revision of ASME B16.5-1996 Interpretations to B16.5-1996 Pipe Flanges and Flanged Fittings-Includes Interpretation No. 3
ASME B16.9 ===> 01/01/2003 Factory-Made Wrought Buttwelding Fittings
Interpretations to B16.9-1993 Factory-Made Wrought Steel Buttwelding Fittings-Includes Interpretation No. 1
ASME B16.10 ===> 06/15/2000 (R 2003) Face-to-Face and End-to-End Dimensions of Valves
Interpretations to B16.10-1992 Face-to-Face and End-to-End Dimensions of Valves-Includes Interpretation No. 1
ASME B16.14 ===> 01/01/1991 Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads
ASME B16.15 ===> 01/01/1985 (R 2004) Cast Bronze Threaded Fittings Classes 125 and 250
Interpretations to B16.5-1985 Cast Bronze Threaded Fittings Classes 125 and 250-Includes Interpretations No. 1
ASME B16.18 ===> 01/01/2001 Cast Copper Alloy Solder Joint Pressure Fittings
ASME B16.22 ===> 01/01/2001 Wrought Copper and Copper Alloy Solder Joint Pressure Fittings
ASME B16.24 ===> 01/01/2001 Cast Copper Alloy Pipe Flanges and Flanged Fittings: Class 150, 300, 400, 600, 900, 1500, and 2500
ASME B16.26 ===> 01/01/1988 Cast Copper Alloy Fittings for Flared Copper Tubes
ASME B16.28 ===> 11/30/1994 Wrought Steel Buttwelding Short Radius Elbows and Returns
Interpretations to B16.28-1994 Wrought Steel Buttwelding Short Radius Elbows and Returns- Includes Interpretations No. 1
ASME B16.34 ===> 01/01/2004 Valves - Flanged, Threaded, and Welding End
Interpretations to B16.34-1996 Valves - Flanged, Threaded, and Welding End-Includes Interpretation No. 2
ASME B16.36 ===> 01/01/1996 Orifice Flanges
Interpretations to B16.36-1996 Orifice Flanges
ASME B16.47 ===> Large Diameter Steel Flanges NPS 26 Through NPS 60-Addenda A - 10/26/1998
Interpretations to B16.47-1996 Large Diameter Steel Flanges NPS 26 Through NPS 60
ASME B16.48 ===> Steel Line Blanks
ASME B31.1 ===> 01/01/2004 Power Piping Cases No. and 26
Interpretations to B31.1-1998 Power Piping-Includes Interpretations No. 2 Through 6, 8 through 10, 13,15, 17 through 25, and 27 through 31
ASME B31.3 ===> 01/01/2004 Process Piping
Interpretations to B31.3-1999 Process Piping-Includes Interpretations No. 1 Through 18
ASME B31.4 ===> 01/01/2002 Pipeline Transportation Systems for Liquid Hydrocarbons and other Liquids
ASME B31.5 ===> 11/01/2001 Refrigeration Piping and Heat Transfer Components-Addenda: 2004
ASME B31.8 ===> 01/01/2003 Gas Transmission and Distribution Piping Systems
B31.8S 01/01/2004 Managing System Integrity of Gas Pipelines-Supplement to ASME B31.8
ASME B31.9 ===> 01/01/2004 Building Services Piping
Interpretations to B31.9-1996 Building Services Piping-Includes Interpretation No. 1-3
ASME B31.11 ===> 01/01/2002 Slurry Transportation Piping Systems
09/30/1990 Interpretations to B31.11-1989 Slurry Transportation Piping Systems
ASME PCC-1 ===> Guidelines for Pressure Boundary Bolted Flange Joint Assembly
ASME OM-S/G ====> 01/01/2003 Standards and Guides for Operation and Maintenance of Nuclear Power Plants- Addenda A: 2004; Addenda B: 2005
ASME BPVC with 2005 Addenda ===> Complete Boiler and Pressure Vessel codes
[SECTION I RULES FOR CONSTRUCTION OF POWER BOILERS -- SECTION II MATERIALS, SECTION II MATERIALS - PART D PROPERTIES -- SECTION V NONDESTRUCTIVE EXAMINATION -- SECTION VIII PRESSURE VESSELS -- SECTION IX QUALIFICATION STANDARD FOR WELDING AND BRAZING PROCEDURES, WELDERS, BRAZERS, AND WELDING AND BRAZING OPERATORS -- SECTION X FIBER-REINFORCED PLASTIC PRESSURE VESSELS and Interpretations]
************************************************************************************************************************
CODES AND STANDARDS LIST IS NOT UPDATED REGULARLY.
PLEASE CONTACT US FOR PARTICULAR CODE AND WE TRY TO FIND LATEST VERSION FOR YOU.