(Here is the list of all web pages from this
server, arranged by language (in 8 languages).
Choose the page that interests you by
dragging scroll bars, then click on this
page to run it:)
(The same list can be displayed from
"Menu 1" by clicking over there on the
item
"Menu 2".)
Here is the list of all my web pages from all servers.
These are arranged primarily by language
(i.e. as web pages in Polish,
English, German,
French, Spanish,
Italian, Greek, and
Russian.) For each language web pages are
arranged by their subjects.
Choose the page that interests you by dragging scroll bars, then click on this
page to run it:
(The same list can be displayed from
"Menu 1" by clicking over there on the
item
"Menu 4".)
Our civilisation is in serious troubles.
The energy reserves of it are close
to running out. For example, some
researchers estimate, that around a
half of energy resources of our planet,
such as crude oil or coal, are already
exhausted. We are endangered by the
so-called "energy death" - unless we find
a new source of clean energy reasonably
soon. As it turns out, such a source is
already known to us. It is a phenomenon
which represents an exact reversal of
friction. It is called the "Telekinetic Effect".
The extensive description of it is provided
on two web pages, namely on pages about
"free energy devices" and about the
"Concept of Dipolar Gravity".
In a manner opposite to friction converting
motion directly into heat, this "Telekinetic Effect"
converts heat directly into motion. So in order
to gain an access to unlimited amounts of
energy, it is enough to trigger this telekinetic
effect in a wire of conductor. After being triggered,
it will cause the motion of electrons within the
volume of this wire, at a cost of heat absorbed
spontaneously by this wire from the air which
surrounds it. But as we know, the motion of
electrons in a wire constitutes an electric
current. Means the device of my invention
which will trigger this Telekinetic Effect in a
wire of conductor will generate electricity
while consuming heat contained in the
environment of it. I call this device the
"telekinetic cell".
The jokingly it can also be called a "fridge
in reverse" - after all it cools down the air
while generating electricity. The construction
and work of this device for sure is feasible.
As I discovered it during writing this web
page, in the first half of 20th century a
primitive version of it was manufacturing
after being embedded into components of
so-called "crystal radio".
It was for this reason that crystal radios were
the only appliances on Earth that worked
perfectly without using any energy supply.
This web page describes the most vital
details of design and principles of operation
of such telekinetic cell.
#1.
What is this "telekinetic cell":
The name "telekinetic cell" is assigned to a
technical device of my own invention, which
(the device) consumes thermal energy that
it spontaneously extracts from the environment,
and converts this thermal energy directly into
electricity. The product of work of such a cell
is an electrical energy. In turn the energy that
it uses for sustaining its own operation is the
heat that it extracts spontaneously from the
surrounding air. The telekinetic cell can be
jokingly described as a "fridge in reverse",
or as a kind of "reversal of electrical heater".
After all, it cools down its own surroundings
during the work, and simultaneously it generates
electricity. This cell belongs to a larger group
of so-called
free energy devices.
After all, the electricity that it generates does
not cost anything (apart from the cost of
constructing or purchasing one of these
devices). Also, for the operation it does
not need any fuel nor any other form of
industrially produced energy. The physical
phenomenon which this telekinetic cell
utilises in the operation for the generation
of electricity, is technically released reversal
of friction, called the "Telekinetic Effect".
In a manner opposite to the one in which
friction spontaneously consumes motion
and generates heat, this Telekinetic Effect
spontaneously consumes heat and generates
motion. In telekinetic cells the motion that is
generated by this Telekinetic Effect takes the
form of motion of electrons in the volume of
a conductor, means in fact this motion is a
flow of electric current that such cells generate.
In some of my publications the telekinetic cell
is also called the "telekinetic battery".
The reason for a equally frequent use of these
two names in my publications, is that in human
terminology the names "cell" and "battery"
are almost synonymous.
The "telekinetic cell" (sometimes also called
the "telekinetic battery") was invented theoretically
by me in second half of 1989. The principle of operation
of it emerged by itself from the analyses of
methods and consequences of technical
triggering of the phenomenon called the
"Telekinetic Effect", which phenomenon
I was researching them intensively. The
description of the manner of inventing this
cell is contained in items #40 and #41 from
subsection A4 of monograph
[1/4].
The theoretical invention of the telekinetic cell
become possible due to a scientific theory on
the development of which I worked at that time.
This theory is called the
Concept of Dipolar Gravity.
One amongst the natural phenomena which this
theory explains exactly, is the phenomenon of
telekinesis.
In turn the technically triggered "Telekinetic Effect"
is the motive force for every telekinetic motion.
Because the Concept of Dipolar Gravity indicated
for me in a theoretical manner how to trigger
technically this Telekinetic Effect, it simultaneously
indicated also to me how to build telekinetic cells.
The first descriptions of telekinetic cells of my invention
were published in 1990. I presented them in the
first edition of my monograph
[6].
Presently the most complete descriptions of these
cells are presented in subsections K2.4 to
K2.4.3 from volume 10 of monograph
[1/4].
I recommend having a look at these descriptions.
After all, they present detailed explanation of
principles and designs which on this web page
could only be summarised briefly.
The curious aspect of the telekinetic cell is that
in fact it is a product of research, which could be
called the "persecuted science". Means, research
which were carried out in spite that every aspect
of it was condemned by other scientists and
therefore needed to be carried out "underground".
In fact, everything that concerns telekinesis,
Telekinetic Effect, and telekinetic cell, was
worked out in my free time designated for
rest, on my private cost, and completely outside
of my official duties at universities. It looked
as if the fate actually wished to emphasise to
people through the invention of the telekinetic
cell, that something is not as it should be with
the treatment of inventors and discoverers on
Earth. For example, all most important discoveries
and findings concerning the telekinetic cell
were accomplished during periods in my life,
when I unemployed. Namely, in years 1990
to 1992 (i.e. in the most depressing period of
unemployment in my entire life, which forced
me even to leave New Zealand in search of
bread) I worked out all tiny details of principles
of operation, design, and main components
of the telekinetic cell. (Means the general idea
of this cell, which I developed earlier, was
transformed then into a detailed project.)
In turn in 2006 (i.e. a year after I started
a next period of long unemployed, which
probably is going to force me again to leave
New Zealand in search of bread), I worked
out the design and operation of further two
versions of reciprocators, means reciprocators
different than the "tube" - the design and
operation of which I knew already much earlier.
In 2006 I also accomplished a vital discovery -
namely that so-called "crystal radios" were
containing telekinetic cells embedded into
their circuitry. Really, the fate has its strange
ways for effective opening our eyes.
Although I personally never got the chance
to implement practically the construction of the
"telekinetic cell" of my invention, still the principle
of operation of this cell was verified in a real
life. This is because some time after I invented
theoretically this my "telekinetic cell", means
between 1990 and 1992, I carried out detailed
analyses of the design and operation of several
working prototypes of the so-called
free energy devices,
that already existed and were operational on Earth.
As it then turned out, the telekinetic cell is a basic
component in several different prototypes of such
"free energy devices" that are already operational
on Earth. Two such free energy devices, which contain
inside the telekinetic cell embedded into them
as one of their main components, are even
described, or illustrated, on a related web page
about
free energy,
which is accessible here via "Menu 1",
"Menu 2", and
"Menu 4".
Namely, these are (1) the "telekinetic influenzmaschine"
described in item #3 of that web page, and illustrated
over there in "Fig. #3a" to "Fig. #3c"; and also (2) the
"telepathic pyramid" illustrated over there on "Fig. #2a"
to "Fig. #2d", but extensively described in a separate
treatise
[7/2]
and also in subsections N2 to N2.7 from volume 11 of monograph
[1/4].
Furthermore, my analyses documented in item #5
of this web page prove, that a primitive version of just
such a telekinetic cell was embedded into circuitry of
so-called "crystal radios" manufactured at the beginning
of 20-th century. In order to realise the fact of this
embedding, one should compare the diagram of
crystal radios shown in "Fig. #2", with the diagram
of telekinetic cell shown in "Fig. #1". It was only
because of containing such telekinetic cells, that
these crystal radios worked perfectly without a use
of any external energy supply. Although some dark
force (probably the one described in item #11 of this
web page) spread amongst people an erroneous
belief, that the crystal radios worked without energy
supply because they absorbed the required energy
from antenna. But in reality no one prepared the
energy balance for this radio. Thus no one has
proven scientifically that the energy which sustained
the operation of crystal radios really originated from
antenna. No one also managed to build any other
kind of radio, which would have similar antenna, but
which would not require any external energy supply.
Surely, if the energy could be absorbed from the
antenna, then almost every kind of radios
should also be able to accomplish such absorption.
The fact, that working prototypes of devices do exist
on Earth, in which main components are just such
telekinetic cells, combined with the simultaneous
existence of numerous theoretical premises for the
feasibility of this invention (explained in item #7 of
this web page), proves that the principle of operation
and general design of the cells described here,
are feasible, workable, and that after these cells
are build, they in fact will work as described here.
Fig. #1: The diagram which illustrates the general
idea and main components of the telekinetic cell.
The above illustration repeats Figure K7 from
volume 10 of monograph
[1/4].
It presents a schematic diagram of the telekinetic cell.
This cell is composed of following main components:
(I1) and (I2) - two telekinetic inductors which generate
electricity, (Q) - pulser, (R) - resonator, (C) - capacitor,
(T) - reciprocator, (A) - autotransformer, (W) - output
terminal from which users collect the electricity generated
by this cell. Each one out of these components, and also
principle of operation of the entire telekinetic cell, are
explained in the content of this web page.
The telekinetic cell of the general design shown
above, can be embedded into electronic circuitry
of any electrical or electronic appliance which this
cell supposed to supply into electrical energy.
How such an embedding is accomplished for
the circuitry of so-called "crystal radio", it is
illustrated in "Fig. #2" below, while explained
in items #5 and #6.3 of this web page. In turn
how this embedding is accomplished for the
so-called "telepathic pyramid" and "telekinetic
influenzmaschine" - which also are supplied
in electrical energy with just such a cell, it is
explained on separate web page about
telekinetic free energy devices.
* * *
Notice that you can see the enlargement
of each illustration from this web site. For this, it suffices to click
on this illustration. Furthermore, most of the internet browsers that you may
use, including the popular "Internet Explorer",
allow also to download each illustration
to your own computer, where it can be looked at, reduced or enlarged to the
size that you may want, or printed with your own graphical software.
#2.
How the theory called the
"Concept of Dipolar Gravity"
explains telekinesis, the Telekinetic Effect, and the operation of "telekinetic cells":
In 1985 I was granted the privilege of developing
an extraordinary scientific theory called the
"Concept of Dipolar Gravity".
Although instead of being accepted and
considered by official Earth's science, so-far
this scientific theory is mainly criticised and
attacked by many "grey personalities" which
act from hiding, in fact in real life it turns out
to be extremely useful. For example, it explains
exactly how telekinesis work, how to trigger
telekinesis in a technical manner, and also
explains what is this "Telekinetic Effect" that
allows us to build telekinetic cells.
The fundamental scientific discovery on which
the theory called the
Concept of Dipolar Gravity
was based, was the finding that gravitational
field in fact displays the presence of all attributes
of a so-called "dynamic dipolar field". This means,
that the beginning of this theory stems from the
discovery, that the gravitational field does NOT
at all belong to a static monopolar type of field -
to which our science to-date categorised it, but is
just such a dynamic dipolar field. In turn this
(one would think) small error of the science to-date
in qualifying the gravity field into a wrong category,
introduces a huge consequences to our understanding
of the operation of the universe. If gravity field
has a dipolar character, means if it has two
poles "In" and "Out" - similar to poles "N" and
"S" from magnetic fields, then the gravity pole
"In" which we see around us, is just only one
of poles of this field. Another pole "Out" of
gravity field must hide somewhere from us.
Because gravity has a concentric character,
this practically means, that the other pole "Out"
of dipolar gravity must penetrate into another
world and emerge over there in a manner that
is unnoticeable to our physical senses. Thus, the
first and the most important consequence of
dipolar gravity is, that according to it our universe
must be composed of two parallel worlds, i.e.
"our world" in which we live, and a parallel
"counter-world" to which our physical
senses have no access. Also, as it can be
proven, the requirement of mutual balancing
of gravity forces, causes one more shocking
consequence. Namely, in such a dipolar gravity
every object formed from matter in our world,
must have in the counter-world an exact duplicate
formed from "counter-matter". Expressing this
in other words, according to the Concept of
Dipolar Gravity, each one of us who lives in
our world, must have its "phantom" which
lives in the counter-world. According to this
concept, such "phantoms", means such exact
counter-material duplicates, must also exist
for all other objects, including trees, rocks,
cars, computers, etc.
The Concept of Dipolar Gravity states also, that
such a "phantom" of any physical object can be
independently caught and moved in another place.
But because this counter-material duplicate is
bind by gravity forces with a given physical
object that exists in our world, if we relocate in
the counter-world this "phantom", then the physical
object also becomes moved in our world. Such
a manner of relocating objects, in which grabbed
and moved is the "phantom" of these objects, while
objects themselves must follow these "phantoms"
pulled by gravity forces, is known on Earth under
the name of "telekinesis". The Concept
of Dipolar Gravity explains also, that telekinesis
can be released in a technical manner. This
technical version of telekinesis is triggered when
the "phantom" of a given object is "wrapped"
in force lines of magnetic field, and then these
force lines are accelerated.
The findings of the Concept of Dipolar Gravity,
which inform us how to trigger technically the
"Telekinetic Effect", have also this advantage,
that they define exactly what actually this effect
is. So let us now provide this definition, taken
from subsection H6.1.2 in volume 4 of monograph
[1/4].
Here it is:
"The Telekinetic Effect is a phenomenon of
the indirect manipulation of a physical object
obtained via the interaction with the counter-material
duplicate of this object." This definition
explains that the Telekinetic Effect is, amongst
others, the source of telekinetic motion in a
manner similar as the physical force is a source
of physical motion. But there is a whole range
of differences between the physical force and
the Telekinetic Effect (this is why, in the explanations
which follow, I avoid using the term "force" for
naming the motion-creating product of the
Telekinetic Effect, and rather name it with the
term "telekinetic thrust"). The most important
of these differences is that (1) the Telekinetic
Effect does NOT exert (return) a reaction force
to its cause. (For a physical force, every
action force must produce an equivalent reaction
force to be returned to (exerted upon) the object
causing this action). Practically this means that
the increase in work completed by the Telekinetic
Effect does not involve any change in the amount
of energy required for the release of this effect.
Moreover, the support of such telekinetic devices
does not require any force, no matter what weight
they lift. This suggests that a device that releases
this effect can also be suspended in space, and
that the lack of reaction forces allows it to remain
unaffected independently of the scale of action
that it causes. Also, for example, a portable
telekinetic crane lifting any object (e.g. a building,
or a huge rock) can be held in a child's hand
without any effort. Furthermore, this implies that
the Telekinetic Effect allows action which are
physically impossible for forces, such as someone
lifting himself up into the air (as we know, in physical
motions this is completely impossible, thus
originates the anecdotic saying about "someone
lifting himself by pulling upwards his own hair").
An example of telekinetic self-lifting is "levitation"
means self-induced ascend. The other major
difference between the Telekinetic Effect and a
physical force, is that (2) the Principle of
Energy Conservation is satisfied for the Telekinetic
Effect due to a spontaneous extraction of thermal
energy from the environment by a telekinetically
moved object itself. This in turn means, that
the energy required for carrying out the telekinetic
motion always supply the receivers, not the givers,
of this motion. Therefore the completion of
a telekinetic work does not require any external
energy supply. So the fulfilment of the Energy
Conservation Principle by receivers (not by the
donors) of the telekinetic motion is accomplished
due to the cooling down the environment of given
objects during the process of telekinetic motion.
This in turn leads to a number of phenomena
explained later, such as the rapid cooling down
the environment of objects shifted telekinetically,
the emission of a subtle "extraction glow", etc.
The knowledge of the Telekinetic Effect and
principles of triggering it in a technical manner
allows us to work out the operation of "telekinetic
cell". Here is a brief description of this operation.
Every such a cell works because a pulser (Q)
sends to it an uniform stream of electrical
impulses. Each of these impulses is reinforced
with additional power by telekinetic inductors (I1) and (I2).
Thus the power of each impulse is greater at
the exit from these inductors, than at the entry
to them. So all that is then needed, is to gather
(means "add together") these small increments
of power carried by each impulse, and forward
the total output outside of the cell. This adding
together is carried out by the resonator (R)
which also forwards the energy so collected
to the output terminal (W). The resonator (R)
is simply an oscillatory circuit. It is known that
such oscillatory circuits accumulate in themselves
(summarise) small portions of energy which
are added to them in subsequent impulses.
Because the cooperation between the resonator
(R) and the pulser (Q) could be hindered by
the so-called "deadlocks" which occur in all
oscillatory systems, there is an additional
component in the telekinetic cell, called the
reciprocator (T). It eliminates these deadlocks.
It removes the deadlock points, mutually
synchronises the oscillations in the resonator
(R) with the oscillations from the pulser (Q),
and allows this device to initiate its oscillations
whenever the telekinetic cell is switched on.
#3.
Main components of the "telekinetic cell" and their functioning:
The reason why the telekinetic cell is able
to work as a whole, is that each component
of it harmonically adds its contribution to
this operation. Means, each one amongst
these components fulfils the function imposed
onto it, which together with functions of remaining
components constitutes the principle of operation
of this cell. Let us describe now each component
and explain what function this component
fulfils in the operation of the whole telekinetic cell:
#3.1.
Telekinetic inductors "I1" and "I2" - means components which telekinetically generate electricity:
The most important component of every
telekinetic cell are two inductors marked
(I1) and (I2) on all diagrams from my
publications - including into this the web page on
free energy devices,
and also this web page. These inductors
are the components in which the telekinetic
generation of free electricity is carried out.
Both these inductors are composed of
permanent magnets, onto which coils of
conductors are wound up. In order to provide
the generation of free electricity in both
halves of sinusoidal cycles, two such
inductors are needed, on which coils
are wound in two opposite directions
when related to the magnetic polarity
of their permanent magnets.
The principle of generation of free electricity in
these inductors is quite simple. Namely the
magnetic field of permanent magnets on which
these inductors are wound, changes the shape
of (normally) sinusoidal curves of the electrical
impulses which flow through these inductors.
The result is, that instead of normally sinusoidal
wave shape of the current flowing through them,
this electricity starts to follow a shape that accelerates
and decelerates electrons. In turn these accelerations
and decelerations of electrons cause the release
of the Telekinetic Effect (means the "reversal of
friction") that acts on these electrons. The Telekinetic
Effect spontaneously converts heat contained
in the environment of these inductors into a
more powerful motion of electrons in wires.
As the outcome, such inductors add small
portions of energy to each electrical impulse
that flows through them. Simultaneously they
absorb heat from their environment. (Means,
while adding energy to the impulses that flow
through them, they simultaneously cool their
environment down.) So the Principle of Energy
Conservation is fulfilled, while the free electrical
energy is still generated.
#3.2.
Pulser "Q" - means the component which generates oscillations that trigger and synchronise the operation of entire this device:
The inductors described above do not
generate their own electricity. They only
telekinetically add the required power to
weak electrical impulses which already
flow through them, but which originate
from other sources. Therefore, in order
these inductors could work, they need to
be supplied with a constant stream of
electric impulses. For this reason, another
vital component of every telekinetic cell,
is the so-called pulser (Q). Such a pulser
is simply any component (or a device)
that supplies inductors (I1) and (I2) with
an uniform stream of electric impulses.
In the "telekinetic influenzmaschines" shown
in "Fig. #1" of a separate web page on
free energy devices
(or in Figure K4 from monograph [1/4]),
and explained over there in item #3, a
pulser is simply a special electrode marked
(ho), which hangs just above a spinning
disk and in front of a permanent magnet,
and thus which gathers uniform electrical
impulses from this spinning disk. In turn
in the telekinetic cell shown over there in
"Fig. #2a" (or on Figure N1 from monograph [1/4]),
this pulser is simply a quartz crystal (Q) that is
made to vibrate uniformly by a beam of telepathic
waves concentrated on it by the resonance cavity
of a pyramid which surrounds this crystal.
Pulser in fact performs several functions in the
telekinetic cell. The most important of these is
the forcing of flow of electrical impulses through
both inductors (I1) and (I2). This in turn causes
the telekinetic generation of electricity in them.
A next its function is to control the frequency of
the current generated by a given cell. This
frequency is always equal to the frequency
of signals send by the pulser.
#3.3.
Resonator "R" - means the oscillatory circuit which binds and adds together the energy generated by this cell:
Inductors of a telekinetic cell work by increasing
slightly the amount of electric power that is
contained in each single pulse of electricity
which flows through them. But these small
amounts of power need later to be added
together in order to build up the energy
output from such a cell. This dynamic
adding together small increases of power
is carried out by the component called the
"resonator" and marked (R) on "Fig. #1" above.
The resonator is simply an oscillatory circuit.
It works in a cell similarly like a swing with
a child, which to the energy already attached
to the body of this child adds each single
portion of energy that a parent contributes
through repetitive pushing this child in the
process of swinging.
If the resonator (R) is so designed that its
electrical oscillations flow through the telekinetic
inductors (I1) and (I2) in both directions, then
the increment of energy has a cumulative character.
The reason is the fact, that the gradient of electrical
energy generated additionally by these inductors,
is always proportional to the electrical energy that
already flows through these inductors. Therefore,
if the telekinetic inductors (I1) and (I2) are parts of
the resonator (R), then the resonator not only
adds together the telekinetic gradients of energy,
but in addition it amplifies this energy in a cumulative
manner.
#3.4.
Reciprocator "T" - means the component which allows a telekinetic cell to start
from a deadlock, which synchronises the oscillations of all components of the
cell, which provides the cell with the required degrees of freedom, etc.:
A "reciprocator" is marked (T) on all diagrams
from this web page, and from monograph [1/4].
It is another very important component of every
telekinetic cell. The reciprocator performs several
quite complex functions. In fact without it the
telekinetic cell would not work. A detailed description
of all these functions is provided in subsection
K2.3 and N2.3.3 from volumes respectively
10 and 11 of monograph
[1/4].
The most easy way to understand for what purpose
serves the reciprocator, is to review the use of it
in old steam locomotives. As probably everyone
is aware, old steam locomotives were propelled
by a piston which carried out reciprocal motion
inside of a cylinder. So in the sense of source of
motion, old steam locomotives were propelled
by a system which also generated an oscillatory
motion - means the motion identical to the one
which is a source of electricity in the telekinetic
cell. But in every such a system which induces
an oscillatory motion, two border points do exist,
in which the change of direction of the motion takes
place. These two points are called the "deadlocks".
For example, in these old steam engines, such
two points lie in places where pistons finish the
motion in one direction, and begin the motion in
the opposite direction. The reason for which these
two points are called "deadlocks" is that if, for
example, a piston from a locomotive stops in
one of these points, then this piston cannot be
moved again just by injecting the steam to a
given cylinder. This practically means, that if
for example, a locomotive which has just a
single cylinder and a single piston, stops on
a station in such an unfortunate manner, that
the piston of it would find itself in one of these
"deadlock" points", then it would NOT be possible
to move again this locomotive for as long, as all
passengers would exit the train and push this
locomotive by hands, so that the piston would
be moved beyond this deadlock point. So in
order to make impossible such stopping of
steam locomotives with their piston located
in one of these deadlock points, old time
engineers started to supply each locomotive
in two pistons working in two separate cylinders.
Each of these pistons was placed on the opposite
side of the locomotive. In turn both of them were
cooperating via connecting rods with a couple of
propelling wheels of the locomotive fixed together.
This their cooperating was done with the mutual
phase shift of 90 degrees. Means, when one of
these pistons was in the deadlock point, then
the second piston linked to the same pair of
wheels that were fixed together, was positioned
just in the centre of its reciprocal motion. Such
a skilful cooperation of both these pistons
constituted a "reciprocator" for steam locomotives.
These reciprocators fulfilled in locomotives a
whole array of different functions, many of which
in other propelling systems needed to be performed
by separate devices. For example, they synchronised
together cycles of both pistons from given locomotives.
Also provided these pistons with mutual phase
shift of 90 degrees. Because of this, reciprocators
allowed locomotives to begin the motion from
every point in which they stopped. Additionally,
reciprocators provided also locomotives with
the inertia of motion. This in turn allowed locomotives
to run smoothly without vibrations. Similar functions
performs also the reciprocator in a telekinetic cell.
Only that instead of initiating, synchronising, and
sustaining mechanical oscillations, it initiates over
there, synchronises, smoothens, and sustains
electrical oscillations.
If we try to summarise briefly here the most vital
functions of the reciprocator in a telekinetic cell,
these are a bit similar to the functions of this pair
of pistons attached to a pair of solid (i.e. joined
together) wheels from such old steam locomotives,
or to a crankshaft and several pistons joined to it
in modern car engines. (Unfortunately, no many
people know what I explained before, namely that
old steam locomotives, in order to be able to start
moving forward together with heavy wagons attached
to them, must have at least two pistons, which were
interconnected via a pair of solid (fastened together)
propelling wheels, so that they could work with
appropriate mutual phase shifts of 90 degrees
in their cycles of strokes.)
Namely, this reciprocator synchronises the work
of all components of the cell and prevents electrical
deadlocks from occurring between
oscillations of subsequent components of a
given telekinetic cell. After all, as the reader
probably knows this well, every oscillatory system
has two points in its motion, which are called
the "deadlock" points. In mechanical engines
these two points are when pistons stop motion
in one direction and begin the motion in an
opposite direction. In turn in electronic oscillatory
systems these deadlocks are positioned in points
of return of their current sinusoids. When we
have a situation, like in a telekinetic cell, that
several separate
oscillatory systems must cooperate with each
other, these deadlock points hinder the cooperation -
if they are not aligned with appropriate phase shift.
In telekinetic cells this required phase shift is produced
by the "reciprocator". Actually, without such
a reciprocator, the telekinetic cell would not be
able to start nor to work properly. Because the
operation of reciprocators (T) is quite complex,
and includes slightly more functions and requirements
than I am able to explain this on such a brief
web page, I would advice to read about them
additionally from subsections N2.3.3 and K2.3
of monograph
[1/4],
where they are described quite comprehensively
and with all required details.
As every component or technical device, also
the reciprocator can be constructed in many
different designs and different technical versions.
The most important of these designs and
versions include (1) a "cluster of galena
crystals" - of the type used in past in "crystal
radio receivers", (2) a "tandem of quartz crystals",
and (3) a "tube" containing crystals of kitchen
salt mixed with mercury (quick silver). Designs
and operation
for each of these versions of reciprocators are
described in item #4.4 below. For example,
if this device is constructed as a "tube" (T),
then it contains an equal volume mixture of
thick grain kitchen salt with mercury, kept
under vacuum.
More information about the purpose, operation,
and the design of reciprocator is contained in
subsections K2.4.1 and N2.4 from volumes
respectively 10 and 11 of monograph
[1/4].
#3.5.
Autotransformer "A" - means a component which passes to the user the electricity generated by this cell:
Autotransformer (A) from the telekinetic cell
fulfils two different functions. Firstly it provides
an additional "inductance", means electrical
inertia, to the oscillatory circuit of the resonator
(R). Secondly it lowers (transforms) relatively
high tension which the telekinetic cell generates,
to the tension that a user wishes to collect from
the output terminal (W) of this cell.
#4.
Preparation of main components of the "telekinetic cell":
Each main component of the telekinetic cell
can be constructed on several different
ways. Onto each manner of constructing
these components appropriate requirements
are imposed. Let us discuss now how to
build each of these components, and also
what requirements are imposed onto
these manners of constructing them.
#4.1.
Telekinetic inductors (I1) i (I2):
These are constructed through winding insulated
wire of conductor onto surface of permanent
magnets. In the telekinetic cell two such inductors
are needed. Each one of them must have
oppositely wound coils of conductor in
relation to the polarity of the magnet on
which they are wound. Means, one of
these inductors is wound clockwise, the
second is wound counter-clockwise.
As I explained it in item #5 of this web page,
the ready made, means factory manufactured,
telekinetic inductors are all earphones of an old
type, which contain inside a permanent magnet
with coils of conductor wound onto it.
The only problem with the use of a pair of such
earphones as inductors for a telekinetic cell
of full efficiency is that in both such earphones
coils are wound in the same direction. (I.e.
both are wound clockwise, while each one
of them supposed to be wound otherwise than
the other one.)
#4.2.
Pulser (Q):
For the pulser (Q) can be used any source
of a pulsating electric signal having a specific
(and constant) frequency. In order to realise
to the reader which sources of such pulsating
signal were practically used for this purpose,
let us review here the list of pulsers which were
already used, or were planed for use, in
specific telekinetic cells that I know of. Here
these are:
(1) Electrodes from a disk of electrostatic
machine, and an induction head suspended
above this disk. For example, in the
telekinetic cell embedded into the "telekinetic
influenzmaschine" described in item #3 of
the separate web page on
free energy devices,
the pulser is a special induction head
"ho" placed near electrodes of this
machine.
(2) Quartz crystal suspended in the focal
point of a pyramid. In turn, in the telekinetic
cell embedded into the "telepathic pyramid"
described in treatise
[7/2],
and also in item #2 of the web page on
free energy devices,
the pulser is a quartz crystal (Q)
suspended in the focal point of a
pyramid (D).
(3) Rails insulated from the ground.
In years 1995 to 2000,
together with a researcher named
Evan Hansen from Utah, USA, who
cooperated with me, we worked as a team
on a version of an extremely powerful
telekinetic cell (the output of which
would be comparable to the output of
some power stations), in which for the
pulser the natural pulsations of electricity
which occur in a railway line insulated
from the ground by wooden slippers,
were planned to be used. When I presently
think about this our project, I realise
that in fact we planned to build slightly
improved version of the gigantic "crystal radio"
described in item #5 of this web page.
Only that in order to increase the power
on the entry (and thus also on the exit),
for an antenna we planned to use
rails lying on wooden slippers - means
rails insulated from the ground. (The
research on this cell was abruptly interrupted
on 23 June 2000, when this my co-researcher
rapidly died in very mysterious circumstances,
probably being murdered - for details of
death of Evan Hansen see subsection A4
from volume 1 of monograph [1/4], while
for details of the "curse of inventors"
which notoriously kills, amongst others,
developers of free energy devices - see
below item #11 of this web page.)
(4) Aerial radio antenna.
For a pulser can also be used
a long aerial radio antenna. In fact, the
"crystal radio receivers" described below
in items #5 and #4.4, used such antennas
for their pulsers. After all, radio antennas
intercept electromagnetic waves of specific
lengths, which via the crystal reciprocator
are then converted into electrical impulses
of a strictly defined frequency.
(5) Quartz clock working on batteries.
As I explained it in item #6 of this web page,
I myself planed for a long time to initiate the
building of the cell described here. For this reason
I have planed for a long time how to produce
subsequent components of this cell in the fastest
and most effective manner possible. In these my
plans, in the first stage of research and development,
for the pulser (Q) I intend to use a ready-made
source of pulsating electrical signal, which is
every quartz clock working on batteries
that can be purchased in any shop. For this
I plan to dismantle a large
quarts clock which I purchase especially for this
purpose, open its electronic circuitry, and then
connect my cell to these electronic circuits
in order to collect the pulsating electric signal
from them. In turn, in the second stage of
research and development, I intend to build
my own quartz circuit, similar to the one that
exists in quartz clocks, only that the power supply
would be provided to it from the same telekinetic
cell that this pulser controls (for the initiation
of this cell, the quartz from this clock would be
squeezed by hand - similarly as this is done in
homes with piezoelectric lighters build into our
gas ovens).
#4.3.
Resonator (R):
The resonator (R) can be any electrical
oscillatory circuit, which the builder of
a given telekinetic cell decides to use in
his device. Of course, as every electronic
oscillatory circuit, such a resonator must be
composed of at least a capacitor (C) and
an inductor (A). In the first stage of research
and development of the telekinetic cell that
I plan to carry out myself, this
resonator (R) I intend to construct in such
a manner that the frequency its own oscillations
coincide with the frequency with which pulsates
the signal that is generated by the pulser (Q)
adopted from a quartz clock.
#4.4.
Reciprocator (T):
In the sense of their design, all reciprocators
for telekinetic cells are build in a similar manner.
Namely, all of them are composed of two
conductive electrodes, between which some
sort of crystals which produce the piezoelectric
effect are inserted. However, as this is
a case with every device or component
which performs a strictly defined function,
also reciprocators from telekinetic cells
can be constructed on several different ways.
Let us review here these technical versions
of such reciprocators, about which we already
know that they were proven in action and
for sure they work as supposed to.
(1) Cluster of galena crystals.
Probably this one is the most simple to produce
out of all versions of reciprocators. In addition,
this technical version is verified in action a
countless number of times. It can also be
tested independently from the telekinetic cell,
by using it as a component of a "crystal
radio receiver". Thus we know, and can prove,
that it for sure must work. The construction
of such a crystal reciprocator boils down to
the skill of such connecting two electrodes to
a cluster of several conductive crystals which
produce the "piezoelectric effect", that a natural
flow of current through these crystals forms
a working reciprocator for a required frequency.
I personally did not experiment with such
a "crystal reciprocator" in the application
for telekinetic cells, nor encountered any
descriptions of experiments of other researchers.
But in times of my youth I frequently "played"
with the so-called "crystal radio receivers".
So I remember well the operation, use, and
significance of crystals of so-called "galena"
in first radio receivers used on Earth and
called "crystal radio receivers". (Galena is
a crystal form of a grey "lead sulfide" (PbS).
The curious aspect of it is, that it forms isometric
crystals with properties similar to these from
sodium chloride - meaning kitchen salt.)
Thus I remember that in order to practically obtain this required
connection of both electrodes to a cluster of
galena crystals, so that it constituted a working
reciprocator, usually only one electrode was
connected permanently to this cluster. The
other electrode was shaped like a thin needle (called the "cat's-whisker"),
and a user was probing with it the cluster of
galena crystals in various places - until it started
to work as a reciprocator. Interestingly, when finally
these crystals started to work as a reciprocator,
and when, because of them, the crystal radio
receiver caught a selected radio-wave, then
these crystals of galena produced sparks
and glowed in darkness almost identically as below it is
described for the working reciprocator in
the shape of a tube with salt crystals and
mercury inside. On the basis of these my
past experience I personally believe, that such
a large cluster of "galena" crystals - identical
in form and operation to these used in old
"crystal radio receivers" is going to provide
a simplest reciprocator for a telekinetic cell.
But for me personally the most shocking is
the discovery described below in item #5 of
this web page. Namely that entire such
old "crystal radio receivers" were in fact
primitive working prototypes of telekinetic
cells described here. This means that
in times of my youth I actually played with
these telekinetic cells without realising it.
Galena (PbS) belongs to most common minerals
on Earth. It is the ore which is used for the production
of led. We should NOT have any difficulty with finding
it ourselves. Also, for constructing a reciprocator
we need very little of it. It is enough to have a
small cluster of pure crystals of it. The dimension
of this cluster do not need to exceed the size
of half of an egg from a sparrow. Biggest deposits
of galena are present in areas where in past led
was produced, or is still produced now. It is also
present in areas where minerals were mined,
which are accompanied by led, e.g. silver, zinc,
copper, antimony. Practically almost every
country have such areas. In Poland these are
present in
Lower Silesia.
Clusters of crystals of galena, which are suitable
for reciprocators of telekinetic cells, can be found
in form of metallic veins which pass through rocks
practically almost everywhere, where not long
ago someone was breaking through these rocks.
Thus, it is present in many quarries, mines,
caves, rocky cliffs, and even can be chiselled
from rocks on sides of new roads that were cut
through rocky terrains. Galena is also present
amongst rock rubble which remained from
such rock quarries, mines, roads, etc.
It can be noticed easily, because its crystals
look metallically and reflect light like freshly
cut pieces of led. In my youth I was finding
many clusters of this mineral amongst rock
rubble that was used for the bed of the railway
line which run through my village
Wszewilki.
Probably the rock rubble used to build the
railway through Wszewilki was produced in
a quarry which contained deposits of galena.
(2) Tandem of quartz crystals.
This one is slightly more advanced design
of a reciprocator. In such a tandem, at least
two large quartz crystals must be connected together
in parallel. Both of them must have a strictly
defined (and exactly the same as the other
crystal) frequency of oscillations. Also each
one of them must be cut along a different
crystal axis. Their frequency of oscillations
must be harmonic to the frequency of the
resonator and pulser from a given telekinetic
cell. It is known to me, that just such tandems
assembled from very big quartz crystals
are used as reciprocators in two working
prototypes of miniature single-disk
telekinetic influenzmaschines called
"Testatica" - which machines are
mentioned on a separate web page about
free energy devices.
Unfortunately, I do not have data regarding
design details nor parameters of work
of these crystals.
(3) Salt and mercury tube.
This one is the most advanced design
of a reciprocator. Such a tube is
simply a glass ampoule. To both ends of this
ampoule two electrodes are melted, both
made of a material resistant to the action of
mercury (quick silver) and salt, e.g. made of
stainless steel. The interior of this tube is
filled up half with salt of large grains, half with
mercury. This mixture of salt and mercury is
then sealed inside of the ampoule after the pumping
air out of it to the vacuum equal approximately
to around 50 and 300 mTorr. For telekinetic
cells of a large electrical output, on the external
surface of this tube a spiral from a high resistance
material can be wound. Reciprocators in shapes
of tubes of the design described here already
were subjected to numerous experiments.
Outcomes of these experiments are described
in subsections N2.6.3 and K2.4.1 from volumes,
respectively, 11 and 10 of monograph
[1/4].
When one sees this reciprocator in the form
of "tube" (T) in action on any free energy device
already build on Earth, it can be easily recognised
because it glows strongly. Namely the free energy
which flows through it causes that it emits a powerful
light. The first photo on the web page about
free energy devices
(see "Fig. #1" over there) actually shows this
reciprocator in the form of "tube" (T) while it
glows. In turn the telekinetic cell from "Fig. #2b"
shows it in a non-glowing state (see the blue
"tube" (T) visible by the floor of the telepathic
pyramid).
#4.5.
Autotransformer (A):
Autotransformer (A) in the telekinetic cell
can be any electronic device which will
decrease the voltage of this cell to the level
(W) required by users. In fact it can be,
and in majority of telekinetic cells probably
will be, a factory autotransformer purchased
in a shop and working for a given range
of voltages.
Of course, instead of the autotransformer (A),
a given cell can also use a transistor electronic
circuit ("solid state") which also will lower down
to the required value the voltage on the output
terminal (W). After all, the autotransformer
is not the only source of inductance (electrical
inertia) in the telekinetic cell. Another source
of this inductance, which in some designs of
circuitry of these cells may suffice, are also
telekinetic inductors (I1) and (I2).
#5.
Shock! Primitive telekinetic cells were already manufactured on Earth over half a century ago - they were called then
"crystal radios":
Over a half of century ago, means in 1950s,
I played with a
"crystal radio".
At that time my parents did not have a "real" radio
receiver. So it gave me a lot of fun to listen from
this substitute of a "real" radio receiver speeches
and stories told by other people and arriving
to our small village
Wszewilki
from a "distant world".
Furthermore, this radio fascinated me for
some reason - now when I think about this
I believe that it was because of this sparking
of its galena crystals, when I managed to
"catch" a radio wave with it. While playing
with these "crystal radio" I did not know
that in fact they represent primitive versions
of telekinetic cells. The fact that they were
such telekinetic cells I discovered only with
a huge surprise during the preparation of
this web page. This is because only then
I analysed the operation of galena crystals
as the simplest reciprocator (outcomes of
this analysis are presented in item #4.4 of
this web page). This was when I discovered
with a shock that in past I hold in my hands
a working prototype of the telekinetic cell. Of course,
the fact that in past already existed on Earth,
and were commonly used, working prototypes
of telekinetic cells, causes that it significantly
simplifies and accelerates the present research
and development on this cell. After all, it allows
to pick up the further development of these
devices from the point to which our ancestors
developed them.
Of course, people who are unaware of the weight
of this discovery, may be surprised that only over
50 years after I played with the primitive prototype
of the telekinetic cell, I rapidly realised what I
actually hold in my hands in times of my youth.
This is because in order to understand this, it
was necessary to previously work out and to
accumulate the entire body of a new discipline
of knowledge about telekinetic cells. It was this
accumulation of new knowledge that took me
half a century.
Crystal radios are very mysterious in every
aspect. For example, on pages 204 and 205
of the book [1FE] by Gavin Weightman, "Signor
Marconi's Magic Box", Harper Publications,
2003, ISBN 0-00-713005-8, an information is
provided, that in 1906 two mutually unknown
to each other inventors patented very similar
crystal radios with "cat's whisker". Unfortunately
this book does not provide their names. The
name of one of them I managed to determine
later by myself - but after long searches. It was
Greenleaf Whittier Pickard. Who is the other
inventor - this still remains unknown to me.
But I am most fascinated by the fact that the
crystal radio appeared on Earth in a very
similar manner as the so-called
telepathic pyramid.
This telepathic pyramid also arrived rapidly to
minds of several different people, as I described
this extensively in subsection C11 and in chapter
E from treatise
[7/2].
What even more interesting, this telepathic pyramid
also had telekinetic cell embedded into its circuits.
Too many strange coincidents, to be just a favourable
converge of circumstances. I personally believe
that these first two crystal radios, as well as the
telepathic pyramid,
and also three first telekinetic influenzmaschines,
all of which devices have telekinetic cells embedded
into their circuitry, in fact were sent to Earth as a
kind of "supplies" which originated from the same
source. What is even more intriguing, that the
evil power
described in item #11 of this web page, does NOT
appreciate these supplies. After all, it is for reasons
that now it is so difficult to find on Earth any useful
information about all these extraordinary devices.
The majority of information for some strange reasons
would not make their way to books nor to internet.
The evidence in support of the fact that "crystal
radio receivers" contained primitive telekinetic
cells embedded into their circuitry, is constituted
by several their attributes. Let us list here and
describe most vital out of these. Here they are:
(1) The design (composition) of crystal radio
documents the presence of all vital components
that are unique for the telekinetic cell.
From the point of view of their composition
the crystal radios were extremely simple
devices. In fact they were composed of
even less components than telekinetic cells
do. Namely they had an aerial antenna (q),
cluster of galena crystals (t), and two earphones
of an old type (i1) and (i2). They also had
several typical electronic parts, such as inductors
and a large tuneable capacitor. These, however,
served only to refine the work of their main
components - for details see item #6.3 of this web page.
For sure these crystal radios did not use neither
a battery, nor any other form of electricity supply.
(Means, the crystal radio of the design used
in this radio set with which I used to play,
for sure used no any electricity supply.
However, I discovered lately that with the
elapse of time "improved" versions of crystal
radios were also produced, which did
require to have an electricity supply.)
At the input these crystal radios utilised aerial
radio antennas (q), which provided them with
the input radio impulses of a required frequency.
Thus, these aerial radio antennas in fact
represented pulsers (Q) from a telekinetic cell.
The "galena" clusters of crystals (t), onto which
the pulsating signal was directed from antennas,
were perfect reciprocators (Q) from telekinetic cells - verified in action.
Although these were the simplest reciprocators
for telekinetic batteries, that I know of, still they worked
perfectly. I provided their description in subsection
#4.4 of this web page. From these reciprocators
the intercepted signal was directed to two earphones
of an old type (i1) and (i2). These two earphones
contained permanent magnets inside, with coils
wound onto them. So in fact these earphones
were two telekinetic inductors (I1) and (I2) similar
to these from telekinetic cells (only that both
of them had coils wound in the same direction).
So the only thing that was missing in order to
make them work as full power telekinetic cells
of a high output, were resonators (r). These resonators
would add together and cumulatively amplify weak impulses
of energy generated in their two telekinetic inductors.
In this way they would cumulatively increase the
power of the electricity generated by these inductors.
But even without such resonators, the crystal radios
still generated small amounts of free electrical energy.
(2) The principle of operation of crystal radio
was identical to the principle of operation of the
telekinetic cell.
Independently from their design, about the fact
that these "crystal radios" were primitive telekinetic
cells certifies also their principle of operation.
If we think about this thoroughly, they needed
to generate small amounts of free electrical
energy in a manner that is identical as this energy
is generated by telekinetic cells. After all, they
had no any energy supply, but simultaneously
they were able to sustain a relatively loud work
of a pair of large earphones of an old type. In order
such earphones could work, normally they need
to be powered with electricity by a sizable battery.
(3) This radio worked without any battery
or any other external energy supply.
In addition to all the above, these radios
were the only devices build on Earth so far, which
without any energy supply still managed to vocalise
weak radio signals intercepted by their antennas.
There is no other electrical or electronic appliance
on Earth, which being completely deprived of any
battery or energy supply, and having at the entry
just a naked wire of antenna, would give at the exit
an useful mechanical work (in their case - sound
vibrations of the air).
(4) Crystal radio was NOT able to work without
earphones-inductors.
The most important evidence, however, that
these "crystal radios" contained embedded
primitive telekinetic cells, was that they did NOT
work without their earphones of an old type.
This inability to operate without earphones
was confirmed experimentally by numerous
researchers. These radios refused to work
even when their earphones were replaced
in them e.g. by miniature speakers which
consumed much less power then them.
This in turn means, that the necessity to
use in them the earphones resulted from the
principles of their operation. Only the theory
of the telekinetic cell explain why this happens.
After all, in the telekinetic cell two inductors
(I1) and (I2) are the components which generate
telekinetically the electricity. In turn earphones
in these radios perform the function of these
telekinetic inductors. So if these inductors were
removed from them, the radios had no right
to work.
This discovery, that old "crystal radios" in fact
included primitive versions of the telekinetic
cell described here embedded into their circuitry,
have a huge significance for us. This is because
it indicates how to build such a telekinetic cell in
the most fast and the most easily manner. After
all, in order to build such a cell, it is enough
to begin with just such a "crystal radio". Then
just gradually improve it until we receive the
final telekinetic cell of a required power.
So if someone have somewhere in an attic such
an old crystal radio receiver (with earphones of
an old type that had permanent magnets
inside), or if knows where to purchase such a
radio, then I would advice him to remove dust
from it, or buy it, and then make it work.
Alternatively, it can be found in old books how
to build such a radio, and then construct it fast
- it is very simple. In turn, when it begins to work,
it suffices to add a resonator to it, which works
on the frequency of the audio wave that can
be repetitively received on a given crystal
radio, to obtain a working telekinetic cell.
Further gradual improvements of this cell
must cause, that with the elapse of time
it will generate for us a current of parameters
which we will wish to have.
In spite that the "crystal radio" contained very primitive
prototype of the telekinetic cell described here,
still it was a prototype that already existed and
worked. So it was a beginning of a new era in
the generation of energy on Earth. Now, when
I managed to identify that in fact we have already
a first working prototype, we only need to improve
it to the level of an efficient cell. So let us roll sleeves
and begin the work! After all, the entire our civilisation
awaits this revolutionary device.
#5.1.
Why the inability of the crystal radio to work when earphones are replaced with speakers,
is a vital evidence that this radio actually contains a "telekinetic cell" embedded into it:
In order to generate electricity in a telekinetic
manner, a "telekinetic cell" must contain
two inductors "I1" and "I2" in which coils
of conductor are wound permanently
around two permanent magnets and
fixed towards these magnets. This is because
if these coils are not fixed, but are able to
move in relationship to permanent magnets,
then the so-called Telekinetic Effect does
NOT appear in them. In turn, it is this effect
that generates electricity in such coils. When
coils are moveable, then the effect is replaced
by physical motion of these coils. So if someone
eliminates earphones of the old type from a
crystal radio, and replaces them with something
else, e.g. with loud speakers, then the Telekinetic
Effect disappears from this radio. After all, although
a speaker has coils and a permanent magnet,
but these coils are assembled in a moveable
manner in relationship to the magnet. So instead
of generating the Telekinetic Effect, these coils
generate their own vibrations which are the
source of voice in speakers.
Therefore, if anyone wishes to make a crystal radio
to work with loud speakers, then he or she would
need to build it in such a manner, that in addition
to the speaker it would still have these two
inductors "I1" and "I2", in which fixed coils
would be wound permanently around a permanent
magnet. Of course, there are at least 3 different
ways on which someone could accomplish it.
For example, he or she could (1) change the
design of speakers in such a manner, that their
coils would be fixed to permanent magnets,
or (2) add speakers but not remove earphones
(so that the radio would have earphones that
represent inductors, as well as speakers),
or (3) add speakers for producing sounds,
and add especially constructed inductors
"I1" and "I2" which would NOT be embedded
into earphones.
At this point it is worth to emphasize, that from
the point of view of the principle of operation
of "crystal radios" just as radios, the replacement
of earphones with speakers does NOT make
a difference. It only changes the manner on
which such radios are supplied into electricity.
After all, when we eliminate the earphones
and replace these by speakers, in the radio
a telekinetic cell is also eliminated, which
was embedded into it. Means, the elimination
of earphones eliminates also the supply of
energy which is necessary for the operation
of this radio. So the sole fact, that after replacing
earphones with speakers, such radios cease
to work, is the most illustrative evidence that
these radios actually contain telekinetic cells
embedded into their circuitry. In turn earphones
are vital components of these cells.
#6.
How to implement the construction of a telekinetic cell described here:
Motto:
A single man may change fate of the world. Try to become this man!
One of the main reasons for which I described
exactly, and now I am disseminating free of
charge, all the information contained on this
web page, is the attempt to inspire with this
web page some other researchers, to undertake
the construction of telekinetic cell. According
to my own experience, two most vital obstacles
which usually stop us from building a device
that was unknown before, usually depend on
(a) our lack of knowledge as to how exactly
this device supposed to work, and (b) we
do not know how to begin the building of it.
Therefore, on this web page I try to remove
both these obstacles. In descriptions from
previous parts of this web page I explained
exactly how the telekinetic cell operates.
So now I explain how to begin the building
of it.
I personally since many years tried to undertake
the building of the prototype of a telekinetic
cell described here. Unfortunately, the
action of the "curse of inventors" described
in item #11 of this web page, always in the last
moment make impossible the proceeding with
this building. (For example, already in three
last academic jobs that I had in New Zealand,
at some stages I attempted to undertake the
construction of this cell - but always shortly
before I initiated my works I was made
redundant from a given job.)
So although I was never given the chance to
initiate the building of this device, I already
went several times through the process of
careful planning how to begin and carry out
this building. In the result of this planning,
I know quite well how I would carry out the
process of building this cell - if somehow I am
able to break through the barriers that this
"curse of inventors" continually erects on
my path. (This curse visibly tries to prevent
me from undertaking the construction of
this device so needed by humanity.) Below
I am going to explain the most vital points
of this my own plan.
If the reader decides to follow my plan, then
I remind about the need to maintain the anonymity.
Everything that is done in this matter, should
be done as an anonymous person, without
giving own details nor address. If we need
an assistance, then we should ask for it people
whom we know well, not by any chance strangers
from internet or from advertisement in press.
After all, this
evil power
about which I write in item #11 of this web
page, immediately after it realises that there
are volunteers for building the telekinetic cell,
will try to identify these volunteers in order to
begin their persecution.
The well known trick of this power depends on
pretending that it wishes to help, in order to be
able to inflict even more damage. So probably
agents of this power will place advertisements
in internet and press, that they have galena
crystals, ready-made reciprocators, or even
complete crystal radios. In turn, these naive
cell developers who reply to these advertisements
and provide their addresses, not only that
will not receive what they really need, but
will also be troubled intensely from then
onwards.
When someone undertakes the completion of
the procedure described here, and initiates the
building of the telekinetic cell, then I would like
to also remind him to arrange a "log" from his research.
In this "log" he should write exactly the essence
of everything that he did or tried in subsequent
days of research. The point is that in research
and development one cannot trust exclusively
own memory - especially when comes to such
quantitative data as parameters of work, parts
used, connections and circuits which were
already tried out, radio stations which were
"caught", weather that prevailed given days, etc.
In order to introduce such a log from research,
it is enough to buy a decent notebook, and
then everyday of research write in it dates and
hours of research plus the essence of whatever
during a given research session one did, found
out, and accomplished, parameters (and prices)
of parts used, diagrams illustrating how these
parts were connected together, descriptions
what results were obtained, etc. Such a log
later will assist enormously our own thinking
and planning of next tests, trials, and moves.
In order to build a fully efficient telekinetic cell,
while simultaneously make the best use of the
advantage that gives to us the existence of a
primitive prototype of the telekinetic cell - which
takes the form of a crystal radio, it is necessary
to complete the construction of this device in two
stages. Below I am going to describe each of
these stages in a separate item.
#6.1.
Working out the correct circuitry, parameters, and course of phenomena in the testing prototype of the telekinetic cell
The goal of this first stage of the building of
telekinetic cell is to work out and to try the
most beneficial configuration of subsequent
parts and electronic circuits which constitute
this cell, and also selecting the right parameters
of work and course of phenomena in this
cell. This stage is to be completed with a
success, when we build a cell which will be
useful in practice. Means which will be portable,
handy, and will generate enough electricity
to supply in power e.g. a bulb in our table lamp.
In this first stage of building the telekinetic cell
we need to take advantage of the fact, that
there is already in existence a primitive prototype
of this cell. Therefore this stage should be
completed with the method of "confirmed
steps", which guarantees to us the final
success. This method depends on starting the
building from a device which already works.
Then it involves the introduction of gradual
improvements to this working device,
one-by-one, with simultaneous checking after
each of these improvements, that with it the
device still works. Please notice that this
method is suitable only for activities which
fulfil several conditions. For example, in
which we know exactly what we wish to
accomplish (i.e. we know what lies behind
the last step), and also for which we already
have a device that works - from which we
can begin our improvements. But it is just
such a case that we deal with during the building
of telekinetic cell. Here are subsequent steps
of this method.
1. Acquiring a working "crystal radio".
The goal of this step is to acquire a working
(primitive) prototype of the telekinetic cell.
This prototype is going to be subjected to
gradual improvements. Of course, it is not
vital how we acquire this prototype of a
"crystal radio" (as long as we do not risk
a loss of our anonymity due to an
attempt to purchase it from internet or from
a press advertisement). Means, it is not
important whether we dust it out from our
own attic, or buy it from someone whom we
know well, or we build it by ourselves - as
this is explained below, step by step, in
item #6.3 of this web page, or it is build
for us by a family member or a friend.
Important is only that (a) the radio
actually works, and (b) it is of the "right"
kind. (The "right" kind of the crystal radio,
is the one which contains a telekinetic cell
embedded into its electronic circuits.)
This is because the evil force described in
item #11 of this web page tries to prevent
the building of telekinetic cells on Earth.
Therefore, knowing that crystal radios are
prototypes of such telekinetic cells,
this evil force removed from households the
majorities of the "right" kinds of crystal radios.
Simultaneously this evil force introduced to
the market several "improved" versions of
similar radios, which do not contain the embedded
telekinetic cell (although include some crystals).
This "right" crystal radio can be recognised
because (A) it does NOT use any energy supply
but it still works, (B) it has a very simple design
(see item #6.3 of this web page), and (C) it has
earphones of the old type (with coils wound
on permanent magnets) and refuses to work
without these earphones.
2. Learning how to use such a "crystal radio".
The goal of this step is to learn how exactly recognise
when this radio works as a telekinetic cell, and
learn how to use it. For this, one needs to use
this radio for some period of time, "catching"
various stations on it, and noticing what happens
when any station is "caught". (I.e. notice how
then behaves the galena crystal, how earphones
perceive a carrying wave deprived of a sound, etc.)
3. Replacement of the antenna and the earth
wire from the radio with connections to a "pulser",
and confirmation that the radio still works.
The goal of this step is to get rid of an inconvenient
radio antenna, and equally inconvenient earth
wire, but still maintain the operation of the
telekinetic cell. In order to implement this
step, the original connection of our radio with
the antenna (A) and with the earth wire (E)
shown in "Fig. #2", we replace by connecting
this radio into a close circuit with a "pulser".
In order to fast obtain such a ready-made
pulser, in this (initial) stage of my own research
and development, I planned to use a quartz
clock (powered by a small battery), and then
utilise for a pulser the impulses which are
generated by electronic circuits of this clock.
In this way signals which run from the antenna
to the earth wire of the crystal radio, are
replaced with pulsating electrical signals which
we collect from these circuits of an ordinary
quartz clock. Notice, that when we make the
radio work after such a replacement, we still
should hear in earphones of this radio sounds
of pulsations of the clock that we used for the
pulser. These sounds will reassure us, that the
prototype of the cell on which we work still
remains operational.
The working device which we obtain after the
removal of antenna and earth wire from the
crystal radio, and after replacing these two
with connections to a pulser, in fact is already
going to be a first prototype of our telekinetic
cell. Our next goal is just to lift the output and
efficiency of this call so much, that it is able to
supply into electricity a home appliance (e.g.
a bulb from a table lamp).
4. Determining the blance of energy and
checking the energy efficiency of the received
version of the cell. At the moment when the
cell which we try to develop and research does
not have neither the antenna nor the earth wire,
it becomes prone for an easy determination of
the energy balance for it, and for calculating the
energy efficiency. In order to accomplish this,
it is enough to measure with some accurate
measuring instrument the power (Pa) of the
electricity at the entry to our cell (while at the
exit from the pulser) - i.e. measure the product
of the voltage (Va) and amperage (Ia) of this
electricity. Furthermore, to measure also the
power (Ph) of the electrical current on the exist
from our cell - i.e. the power of the current that
flows between both earphones (H). Then we
are able to calculate the entire efficiency of the
cell e=100(Ph/Pa) expressed in percents - see
below item #10 (1) from this web page.
This efficiency should exceed 100% - i.e. the
value that is a proof for us that the telekinetic
inductors contained in earphones in fact do
generate their own electricity. Knowing this
efficiency (e) for the first version of our cell,
we can now measure it also after each next
step in our research and development of the
cell. If this efficiency is systematically growing,
then it means that our cell becomes increasingly
better and increasingly more effective. This
in turn means that a last improvement we
introduced is correct and that we should
continue our work in this direction.
5. Adding the "resonator" and again confirming
that the radio still works. Inductors from
earphones of our radio are unable to generate
the amount of electric energy which is necessary
to run any appliance. Therefore we need to add
to our radio a resonator, means an oscillatory
circuit which contains two inductors (I1) and (I2).
After it is added, we still need to make sure that
the entire our telekinetic cell actually works.
6. Adding "autotransformer", or other exit
collector of energy, and confirming that the cell
successfully powers with electricity an appliance
(e.g. a lamp - bulb). When our cell begins
to generate the required amount of energy, we
need to find a way to draw this energy from it
and to use this energy for practical powering
of any appliance. After completing this step we
obtain a first "testing" prototype of our cell.
This prototype is going to be suitable for a
limited use, because will produce free energy
which suffices to power an appliance. But in
order to transform it into efficient telekinetic cell
suitable for mass production in a factory, this
prototype still requires further improvements
described in item #6.2 of this web page.
* * *
I personally encourage, that after the completion
of above steps in construction of the telekinetic
cell described here, the reader gets in touch with
me, but writing under a pseudo-name (my email:
totalizm@gmail.com).
After all, it is desirable that "just in case" one
continually inform me about facts that he or
she already established, and about the progress
in construction. The reason is that the building
of this device lies in interest of all of us, while
this "curse of inventors" is not going to sleep.
Also I have a bit of thinking-over and knowledge
on this subject. So sometimes I could have some
useful advice or information. I will not mention
the fact, that for the good of this device, and for
one's own security, it is better if one anonymously
publishes the most vital findings which one
determined in the matter of constructing this
cell (for details see item #11 of this web page).
In turn, if technical and financial constrains
allow this, perhaps it would be the best solution
if we carry out this construction together (i.e.
the reader and myself - working in the same
laboratory, or in the same factory prototyping
facility). After all, the known proverb states that
"two heads are better than one".
#6.2.
The transformation of the testing prototype into the telekinetic cell of full efficiency:
The goal of this second stage of the research
and development of telekinetic cell, is to
work out the prototype which is suitable for
the serial production in factories. In turn such
a cell must fulfil a number of conditions, which
were not necessary for our testing cell prepared
according to the procedure from item #6.1
of this web page. For example, the cell for
serial production in factories must (a) be
easy to use and must work even when it is
switched on by a layman. Thus it cannot
contain galena reciprocator - the making
of work of which requires significant skills
and experience.
It must also (b) generate electricity of the
strictly required frequency and voltage -
for Europe 50 Hz and 220 Volts. Thus it
will be suitable for powering every our
house appliance. It also must (c) provide
the required power of electricity, (d) be
sufficiently reliable, (e) be safe in use,
(f) have appropriate longevity, and (g)
fulfil several more requirements imposed
by law and tradition.
In order to build a telekinetic cell which fulfils
all the above requirements, our procedure of
action must be different. Namely, from the very
beginning we must set ourselves towards fulfilment
of these conditions. Of course, we already have
this advantage in comparison to the procedure
from item #6.1, that on this second stage we will
know exactly which circuits do work and how, what
we need, how to accomplish this, etc. Means we
are already going to have both, the model of
the working cell for supporting our work (i.e.
the testing cell build for item #6.1), as well as
the experience which we gained previously.
So here are some steps in our new developmental
procedure which now we need to follow.
(1)
Constructing the reciprocator (a "tube").
In fact the reciprocator is the component of
the telekinetic cell, which is one of the most
difficult to build. Simultaneously it is the component
without which the cell is NOT going to work.
Therefore, I suggest to all these inclined towards
electronics, which would like to experiment with this
cell, to begin their activities from the undertaking the
construction of just this component. If it is ready,
all remaining components will become much
easier for constructing.
(2)
Constructing the pulser (Q). At this advanced
stage of research and development, it becomes
necessary to build our own pulser. Thus, in my
own plans, I intended to build my own oscillatory
circuit very similar to the one from a quartz clock.
Only that in my own oscillatory circuit I planned to
make sure that the following conditions are met:
(a) it generates electrical pulses of exactly 50 Hz
frequency (or 60 Hz - if I carry out my research
and development in America), (b) the energy
supply to this pulser are provided from the telekinetic
cell which is controlled by this pulser. Because
of this, such a cell would become fully self-sufficient.
Thus, after the work of it is initiated, it would NOT
need any energy or electricity supply.
(3)
Construction of the resonator (R). This resonator
must have frequency tuned to the frequency of the
pulser (50 Hz). Therefore I would construct it only
after the pulser is ready.
(4)
Completing of the remaining components of the cell.
When the proven in action tube, pulser, and resonator
are ready, then one can initiate the construction or
purchase of the remaining components of this cell.
(5)
Finding the working configuration and parameters of
the cell. The telekinetic cell described here was
invented theoretically. This means, that theories that
I developed allowed me to deduce theoretically the
principle of operation and general design of this device.
But this principle and design must now be implemented
technically. For this reason it is necessary to establish
in what configuration subsequent components of this
cell must be connected in order to work, what parameters
of their work will guarantee the most effective their operation,
what additional conditions must be fulfilled, etc. The
establishing of all this, unfortunately, requires putting
into the construction a bit of one's own inventiveness
and skills.
#6.3.
How to build ourselves a "crystal radio":
The key to a success in the stage of our
building which is described in item #6.1 above,
is to have a working crystal radio. Because
such a radio in present times is probably
quite difficult to acquire, in this item I am
going to explain how to build it on our own.
After all such a radio is very simple - see
the diagram from illustration "Fig. #2".
Here is the procedure:
(0)
Acquiring the knowledge which we are going to need.
For this we should read about crystal radios from
books or internet, talk to older people who used
such radios, or - if possible, see photographs
or even real exhibits of such radios. We need some
understanding of such matters as the appearance
of galena crystals, designs and work of galena
reciprocators (the one with a "cat's whisker"),
components of crystal radio, winding of its antenna
coil, earphones of an old type, antenna, earth
wire, etc. This knowledge is most thoroughly
presented in old books, published between years
1906 and 1960. In new books it is rarely available
although after some searches it also could be
found - as an example see page 2 of the book
[2FE] by Philip Hoff, "Consumer electronics for
engineers", Cambridge University Press, 1998,
ISBN 0-521-58207-5. The appearance of a ready
crystal radio can be seen in museums and
internet. For examples of it see internet addresses
indicated in comments under the post #84 from the
blog of totalizm, e.g.:
museum of Warsaw uprising,
tv,
radio Białystok,
detefon museum,
diagrams of crystal radios,
patent documentation of crystal radio,
etc., etc.
(1)
Acquiring a cluster of galena crystals for
building the reciprocator. Unfortunately,
in present times one cannot go to a fist radio
shop on the street and buy there a galena
reciprocal. So this reciprocal we need to
build ourselves. The building we begin from
getting somewhere a cluster of galena
crystals. The cluster that we need is of
a size and shape of a sparrow egg cut in
half. Where we can gather such a crystal
it is explained in item #4.4 of this web page.
(Best if we find galena ourselves, or through
members of our family, or friends whom
we know well, or if we purchase it anonymously.
But under no excuse we should order
it in internet and provide our address.)
It is worth to know, that apart from crystals of galena
(i.e. lead sulphide, PbS), crystal radio can also work
on any different clusters of crystals which display
following two attributes, namely (1) a good electrical
conductivity, and (2) the formation of piezoelectric
effect. A piezoelectric effect is formed practically by
every regular crystals. So in order to check whether
crystals that we find somewhere actually are suitable
for making a reciprocator, it suffices to check whether
they conduct electricity. (I.e. it suffices to connect them
into a closed circuit which includes a battery and
a bulb, and then check whether the bulb is going
to lite up.) As it turns out, in practice there is a large
number of crystals which fulfil both above conditions,
and thus turn suitable for building reciprocators.
Many of such crystals is easy to recognize at a
first glance, because their surface looks metallic.
Two most popular amongst such crystals, for
which a crystal radio was already tested experimentally
and proven to work well, are zincite (i.e. red oxide
of zinc, ZnO) and chalcopyrite (i.e. copper pyrite,
CuFeS2, having a golden colour). But in practice
such crystals suitable for reciprocators are plentiful.
In fact, the book [4FE] seem to indicate that even two
transistors connected in parallel and fulfilling the above
two conditions, can also replace galena crystals
in this radio. In case of using transistors instead
of crystals, their "C" connectors soldered together
are used as the inlet to the reciprocator, while
their "E" connectors are used as outlets. Third
(looking like spare) connectors "B" are joined to "E"
via a coil of the inductance of 6 T. The transistor
reciprocator obtained in this manner is replacing
the (G) in "Fig. #2". It is worth to remember what
I explained in item #3.4 of this web page, that
individual crystals (or transistors) constituting
a given reciprocator, fulfil the same function as
individual cranks on the crankshaft of a multi-cylinder
engine. Means, the more of them is in a given
reciprocator, and the wider is spread of their
angular orientations, the more smooth and
deprived of jerks is the work of a given telekinetic
cell (or a source of motion).
(2)
Constructing the reciprocator. Before
we undertake the building of reciprocator (G),
perhaps it is good to ask someone older to
explain to us how it looked like. Main
parts of this reciprocator include (i) this
galena crystal held by one electrode and
directed with a flat surface outside, and
(ii) a so-called "cat's whisker" - means a
needle-shaped electrode provided with
a handle (e.g. similar to that from a syringe).
This needle-shaped electrode should
be possible to manipulate, so that
we could touch with it galena crystals
in various places (to find a right spot
from which the reciprocator works).
The actual making of the reciprocator
can be designed in many different ways -
depending what tools and materials are
in our disposal. Here are descriptions
of several most frequent designs.
-
The reciprocator with "cat's whisker" working on
principles of a syringe. In a fastest, although
temporary manner, such a reciprocator
can be made is one purchases a large
fuse holder, of a type used in cars or radios.
Then on one connector of this holder elongated
cluster of galena crystals is mounted, while in
other connector a small syringe is fastened.
From the syringe the needle is removed,
while to the piston a thin wire of a "cat's
whisker" is glued. The wire penetrates
through the flange that normally holds
the needle, like through a bearing. This
wire must be connected electrically with
the opposite to galena connecter of the
fuse holder. If the wire is slightly bend,
then just by rotation and by pushing the
piston from this syringe the wire can
touch galena crystals in various places,
so that the place is found in which these
crystals will work as a reciprocator. The
reciprocator of just such a design was
used in the crystal radio set with which
I "played" in times of my youth. It was
very convenient and handy in use.
-
The reciprocator from a transparent pipe.
I saw in internet a temporary design of a
reciprocator obtained through the use of a
transparent plastic pipe. Into one end of this
pipe a metal electrode holding galena
crystals was pushed. Into the other end
of the same pipe a kind of cork was inserted,
which held the electrode "cat's whisker".
By manipulating and rotation of this cork
the touching of galena crystals in different
places was obtained.
-
The reciprocator in shape of a hammer on a hinge.
In this design a small "hammer" is made, which is
fastened to a hinge. The hammer has a handle
which allows it to be lifted up and lowered down.
To the head of this hammer a "cat's whisker"
wire is attached. Instead of an anvil which this
hammer supposed to hit, a second electrode
holding galena crystals is placed. This reciprocator
allows the selection of the point of contact through
lifting the hammer and bending the "cat's whisker".
The diagram of just such a reciprocator is published
on page 42 of the book [3FE] by Chas E. Miller,
"Valve Radio and Audio Repair Handbook",
Newness 2000, ISBN 0-7506-3995-4.
(3)
The winding of antenna coil. The antenna coil
(L) for the crystal radio is recommended to made
ourselves. For this we need a pipe made of some
non-conductive material. The pipe should be around
3 cm in diameter and around 20 cm in length. It
is going to be a core for winding our coil. In internet
I saw a recommendation that for such a pipe an empty
plastic bottle of just such dimensions is used, from
which (the bottle) the neck and the bottom is cut off
(in just such bottles various chemical and cosmetic
products are sold in supermarkets). For such a
pipe cartoon cores from kitchen foils or paper
towels can also be used. On this pipe we then
wound tightly, one coil next to other, around
150 or 80 coils of conductive wire recycled
from some old radio transformer or other
coil. In order the final coils is stronger and
resistant to scratches, after we finish it we
can cover it with a transparent paint.
(4)
Purchase of remaining parts and components.
Crystal radio is very simple. It uses only several
parts. In order to build it, in addition to the reciprocator
which (G) and the coil (L) we build ourselves - as
I described this in (2) and (3) above, we also need
to purchase (or dismantle it from an old radio or
television set) as follows: (i) a tuneable capacitor
(C) of the type used in old radios for "catching"
(tuning into) stations, (ii) a headset (a pair of
earphones) of an old type. The capacitor should
be of a maximal capacitance of around 365 pF.
In turn headset should have the impedance of not
less than 2000 Ohms.
(5)
Making the radio. For this we need to connect
together subsequent parts and components of the
crystal radio - as this is shown on the diagram from
"Fig. #2" of this web page.
(6)
Spreading the temporary antenna, the instalment of
the temporary earth wire, and tuning the radio.
A crystal radio works only
if the signal from the pulser, means from the receiving
antenna (A), exceeds an appropriate threshold power.
In order this power is exceeded, it is necessary to
spread an antenna (A) which has a length of at least
15 meters. In present times of limited spaces and
quarrelsome neighbours, the finding place to spread such
an antenna (A) is quite a tricky bit. So an inventiveness
is needed how to accomplish this. Fortunately for us,
we need the antenna (A), and also the earth wire (E),
only temporary, means until we learn how to use the
crystal radio, and until we exchange the antenna (A)
and the earth wire (E) for two wires connecting a
pulser - e.g. for signals from a quartz clock powered
by a battery. Then we can dismantle the antenna (A)
and the earth wire (E) - they are not needed any more.
The temporary earth wire (E) can be any conductor
that runs through the ground, e.g. a wire attached
to a metal bucket thrown into a well, a pipe e.g.
with water, or even (but only during a good weather)
our house lightning arrester. For more information
about antennas and earth wires - see radio hams
literature, or internet.
(7)
Learning how to use this radio. Having a crystal
radio does not guarantee that we are going to know
how to use it. So again we need an experience and
curiosity - or a help of someone who already used
this kind of radios.
Fig. #2: Schematic diagram of the original version of
crystal radios. It is the above design of this radio that
contains a telekinetic cell embedded into its circuitry.
(In order to see how the telekinetic cell is embedded
into circuits of the crystal radio, compare the above
diagram with the diagram from illustration "Fig. #1",
remembering that each earphone "H" in fact is a
kind of telekinetic inductor similar to that marked "I1".)
The highly intriguing aspect of the above radio was,
that in 1906 it was independently patented by two
separate inventors who did not know about each other.
Thus the origin of this radio remind me the origin of the
"telepathic pyramid",
which is described in subsection C11 and in chapter E
from treatise
[7/2].
(Means both, the crystal radio and the telepathic
pyramid were independently conceived by several
creative people who did not know about each other.)
Original versions of the crystal radio were composed
of the following parts, the mutual connection of which
is illustrated at the above Figure. Antenna (A). Empirical
findings state that in order the pulsating signal from
the antenna exceeds the required threshold value,
the antenna must be at least 50 feet in length (i.e.
not less than 15 meters). The earth wire (E).
Coil (L). In original specifications this coil was
defined as wound in a single layer on the surface
or a non-conductive pipe. The pipe was around
3 cm in diameter, and around 20 cm in length.
It had 80 coils of conductor wound for the radio
for long range of AM wavelengths, or 150 coils
for the radio that receives middle AM wavelengths.
(It could also be a single coil composed of two
segments and a switch, so that than the radio
could work on both ranges of AM wavelengths.)
Tuneable capacitor (C) of the maximal capacitance
around 365 pF. Cluster of galena crystals (G) with
"cat's whisker" for selecting the working connection
point. Headphones (H) of an old type containing
coils wound onto permanent magnets. These
headphones must have impedance of at least 2000 Ohms.
(Notice that present earphones typically have the
impedance around one-third, or less, of this value.)
Each one out of the above parts, and also the principle
of operation of the crystal radio, are discussed in the
content of items #4.4, #5, and #6.3 from this web page.
#7.
Why I am so sure that after being build, my telekinetic cell will work as described here, generating an abundance of free energy:
Motto:
If something constitutes a truth, confirmations are visible from all directions.
Many present highly titled scientists accept
astronomical salary for the privilege of
proving to commoners that devices of the
type like the telekinetic cell described on
this web page will NOT work at all. In their
enthusiasm of happy overproduction of
arm chair justifications, these highly titled
scientists suffocated the humanity with an
avalanche of speculations and erroneous
opinions which at the moment normal people
have no chance to verify - and thus which
need to be taken at a face value. (These
opinions are of the type that the operation
of such devices supposedly runs against
principles of thermodynamics, or that they
represent a return to an old idea of
"Perpetual Motion", etc.)
Thus everyone who at the moment reads
this web page probably wonders where my
absolute certainty comes from that such
telekinetic cells can be build, and after they
are constructed they will really work as it is
described here, providin
